Autonomous Navigation Framework for Mobile Robots in Highly Dynamic and Complex Indoor Environments
-
DOI:
https://doi.org/10.67228/30715725/IJIARE-2023PI6U7IPublished 01-04-2023
Autonomous Navigation, Semantic SLAM, Deep Reinforcement Learning, Mobile Robots, Complex Indoor Environments, Intelligent Automation Issue
Section
ArticlesHow to Cite
[1]R. Chandra, “Autonomous Navigation Framework for Mobile Robots in Highly Dynamic and Complex Indoor Environments”, IJIARE, vol. 6, no. 1, pp. 01–08, Jan. 2023, doi: 10.67228/30715725/IJIARE-2023PI6U7I.Abstract
Autonomous navigation in complex, dynamic indoor environments is one of the fundamental challenges in intelligent automation and robotics engineering. Conventional Simultaneous Localization and Mapping (SLAM) approaches heavily rely on geometric arrangements, making them vulnerable to sensor performance degradation, localization drift and navigational crash in busy environments populated by dynamic objects or humans. The main contribution of this work is the introduction of a novel, robust hybrid semantic-geometric navigation framework specifically envisioned for mobile service robots to overcome these fundamental limitations. This work proposes an architecture that fuses real time Semantic Segmentation networks and Deep Reinforcement Learning (DRL)-powered local planners into a system able to parse spatial geometry together with semantic contextual environments. The navigation stack classifies static structures, predictable dynamic agents and erratic obstacles in indoor features into three isolated subspaces that optimize trajectory generation while retaining the localization. Experimental validation in simulation environments with dense layout of obstacles and real-world indoor environments show that the proposed framework achieves 14.5% improvement in path efficiency, with 18.2% less computational time for trajectory compared to baseline ROS NavFn and dynamic window approaches (DWA). These results suggest that this combination of high-level semantic awareness with low-level geometric tracking is a robust and scalable framework for future indoor autonomous systems.
References
[1] Bresson, G., Fagnant, Z., Novel, I., Gruyer, D., & AI-Net Team. (2017). Simultaneous localization and mapping: A survey of current trends in autonomous driving. IEEE Transactions on Intelligent Vehicles, 2(3), 194-207.
[2] Cadena, C., Carlone, L., Carrillo, H., Latif, Y., Scaramuzza, D., Neira, J., Reid, I., & Leonard, J. J. (2016). Past, present, and future of simultaneous localization and mapping: Toward the robust-perception age. IEEE Transactions on Robotics, 32(6), 1309-1332.
[3] Mnih, V., Badia, A. P., Mirza, M., Graves, A., Lillicrap, T., Harley, T., Silver, D., & Kavukcuoglu, K. (2016). Asynchronous methods for deep reinforcement learning. International Conference on Machine Learning, 1928-1937.
[4] Runz, M., Buffier, M., & Agapito, L. (2018). MaskFusion: Real-time recognition, tracking and reconstruction of multiple moving objects. IEEE International Conference on Robotics and Automation (ICRA), 10-20.
[5] Sauder, J., & Siever, A. (2024). Deep reinforcement learning strategies for context-aware robotic locomotion in distribution warehouses. Journal of Intelligent Automation & Robotics Engineering, 41(2), 89-104.
Downloads
How to Cite
[1]R. Chandra, “Autonomous Navigation Framework for Mobile Robots in Highly Dynamic and Complex Indoor Environments”, IJIARE, vol. 6, no. 1, pp. 01–08, Jan. 2023, doi: 10.67228/30715725/IJIARE-2023PI6U7I.
Most read articles by the same author(s)
- Dr. Pooja Agarwal, Dr. Rakesh Chandra, Smart Robotic Systems for Hazardous Industrial Environments , International Journal of Intelligent Automation & Robotics Engineering: Vol. 1 No. 2 (2018)
- Dr. Pooja Agarwal, Dr. Rakesh Chandra, Design of Autonomous Inspection Robots for Infrastructure Monitoring , International Journal of Intelligent Automation & Robotics Engineering: Vol. 3 No. 2 (2020)
- Dr. Pooja Agarwal, Dr. Rakesh Chandra, Adaptive Force Control Strategies for Collaborative Robotic Manipulation , International Journal of Intelligent Automation & Robotics Engineering: Vol. 4 No. 2 (2021)
Similar Articles
- Mr. Vikram Sethi, Edge Intelligence for Real-Time Industrial Automation Systems , International Journal of Intelligent Automation & Robotics Engineering: Vol. 8 No. 1 (2025)
- Dr. Rajesh Kumar Sharma, A Reconfigurable Industrial Robot Architecture for Smart Manufacturing , International Journal of Intelligent Automation & Robotics Engineering: Vol. 2 No. 1 (2019)
- David Thompson, Robotic Process Optimization Using Evolutionary Algorithms , International Journal of Intelligent Automation & Robotics Engineering: Vol. 3 No. 1 (2020)
- Rahul Mehta, Vision-Based Object Handling in Collaborative Robotics , International Journal of Intelligent Automation & Robotics Engineering: Vol. 2 No. 1 (2019)
- Dr. Arvind Kumar Singh, Dr. Lakshmi Narayanan, Neuromorphic Spiking Neural Networks for Low-Latency Autonomous Navigation , International Journal of Intelligent Automation & Robotics Engineering: Vol. 1 No. 2 (2018)
- Alan Bundy, Karen Spärck Jones, Edge Computing Architectures for Intelligent Embedded Robotic Systems , International Journal of Intelligent Automation & Robotics Engineering: Vol. 7 No. 2 (2024)
- Ole Secher Olesen, Digital Twin-Enabled Autonomous Robotic Maintenance Frameworks , International Journal of Intelligent Automation & Robotics Engineering: Vol. 7 No. 1 (2024)
- H. N. Mahabala, Predictive AI Models for Intelligent Robot Health Monitoring , International Journal of Intelligent Automation & Robotics Engineering: Vol. 7 No. 2 (2024)
- Corrado Böhm, Corrado Gini, Real-Time Embedded AI for Industrial Robot Monitoring , International Journal of Intelligent Automation & Robotics Engineering: Vol. 5 No. 2 (2022)
- Dr. Linda Martinez, Dr. Mark Richardson, Digital Twin-Based Performance Optimization of Industrial Robots , International Journal of Intelligent Automation & Robotics Engineering: Vol. 4 No. 2 (2021)
You may also start an advanced similarity search for this article.