CFD Analysis of Heat Transfer in Compact Heat Exchangers

  • Authors

    • Dr. Priya Natarajan Associate Professor, University of Madras, India. Author

    DOI:

    https://doi.org/10.67228/3071-6357/IJMRSE-2019PI3C4Q

    Published 03-01-2019

  • Compact Heat Exchanger, Computational Fluid Dynamics, Heat Transfer Enhancement, Pressure Drop, Turbulence Modeling, Thermal Performance

    Issue

    Vol. 2 No. 1 (2019)

    Section

    Articles

    How to Cite

    CFD Analysis of Heat Transfer in Compact Heat Exchangers. (2019). International Journal of Modern Research in Science & Engineering, 2(1), 01-15. https://doi.org/10.67228/3071-6357/IJMRSE-2019PI3C4Q

  • Abstract

    Compact heat exchangers (CHEs) are widely used in modern thermal systems due to their high heat transfer efficiency, compact size, and reduced material usage. They find applications in aerospace, automotive, power generation, chemical processing, and electronics cooling. With the growing demand for energy-efficient and lightweight systems, advanced designs such as plate-fin, microchannel, and printed circuit heat exchangers have gained attention. This study presents a CFD-based analysis of heat transfer and fluid flow in compact heat exchangers. Using the finite volume method and RANS turbulence models, the research evaluates key parameters such as temperature distribution, velocity fields, pressure drop, and thermal performance under varying operating conditions. Parametric studies examine the influence of Reynolds number, inlet temperature, flow arrangement, and surface enhancements. The results highlight the trade-off between heat transfer efficiency and pressure loss, emphasizing the importance of design optimization. Overall, the study demonstrates that CFD is a powerful tool for improving the performance of compact heat exchangers while reducing development cost and time.

  • References

    [1] R. K. Shah and D. P. Sekulić, Fundamentals of Heat Exchanger Design, Hoboken, NJ, USA: Wiley, 2003.

    [2] A. L. London and W. M. Kays, Compact Heat Exchangers, 3rd ed., New York, NY, USA: McGraw-Hill, 1984.

    [3] S. Kakac, H. Liu, and A. Pramuanjaroenkij, Heat Exchangers: Selection, Rating, and Thermal Design, 3rd ed., Boca Raton, FL, USA: CRC Press, 2012.

    [4] P. D. McDonald, “Printed circuit heat exchangers,” Applied Thermal Engineering, vol. 20, no. 4, pp. 471–482, 2000.

    [5] J. G. Kim and J. M. Lee, “Thermal–hydraulic performance of microchannel heat exchangers,” International Journal of Heat and Mass Transfer, vol. 47, no. 6–7, pp. 1369–1381, 2004.

    [6] B. Webb and N. Kim, Principles of Enhanced Heat Transfer, 2nd ed., New York, NY, USA: Taylor & Francis, 2005.

    [7] M. Manglik and A. E. Bergles, “Heat transfer and pressure drop correlations for the rectangular offset strip fin compact heat exchanger,” Experimental Thermal and Fluid Science, vol. 10, no. 2, pp. 171–180, 1995.

    [8] T. A. Ameel, R. O. Warrington, R. A. Wegeng, and M. K. Drost, “Experimental investigation of turbulent flow in microchannels,” International Journal of Heat and Mass Transfer, vol. 40, no. 5, pp. 1043–1054, 1997.

    [9] S. G. Kandlikar, “High flux heat removal with microchannels—A roadmap of challenges and opportunities,” Heat Transfer Engineering, vol. 26, no. 8, pp. 5–14, 2005.

    [10] Y. Zhang, Z. Guo, and J. Li, “CFD simulation and experimental validation of plate-fin heat exchangers,” Applied Thermal Engineering, vol. 31, no. 17–18, pp. 3378–3385, 2011.

    [11] A. Bejan, Convection Heat Transfer, 4th ed., Hoboken, NJ, USA: Wiley, 2013.

    [12] J. M. P. Quesada, L. Cheng, and G. Ribatski, “Flow boiling heat transfer in microchannels—A review,” International Journal of Heat and Mass Transfer, vol. 55, no. 1–3, pp. 645–662, 2012.

    [13] H. Peng, G. Ding, and Y. Hu, “Numerical investigation of flow and heat transfer characteristics in corrugated microchannels,” Applied Thermal Engineering, vol. 29, no. 17–18, pp. 3402–3410, 2009.

    [14] S. Patankar, Numerical Heat Transfer and Fluid Flow, Washington, DC, USA: Hemisphere Publishing, 1980.

    [15] X. Li and A. Kleinstreuer, “Thermal performance and pressure drop correlations for microchannel heat sinks,” International Journal of Heat and Mass Transfer, vol. 53, no. 23–24, pp. 5023–5034, 2010.

  • Downloads