Development of Autonomous Monitoring Drones for Infrastructure Inspection

  • Authors

    • Dr. Yuki Nakamura Associate Professor, Kyoto University, Japan Author

    DOI:

    https://doi.org/10.67228/30716357/IJMRSE-2023PI7N6K

    Published 03-05-2023

  • Autonomous Drones, Infrastructure Inspection, UAV, Structural Health Monitoring, Computer Vision, Artificial Intelligence, Civil Infrastructure, Remote Sensing, Damage Detection, Smart Infrastructure

    Issue

    Vol. 6 No. 1 (2023)

    Section

    Articles

    How to Cite

    Development of Autonomous Monitoring Drones for Infrastructure Inspection. (2023). International Journal of Modern Research in Science & Engineering, 6(1), 01-16. https://doi.org/10.67228/30716357/IJMRSE-2023PI7N6K

  • Abstract

    Infrastructure assets such as bridges, roads, highways, tunnels, dams, power transmission lines, and high-rise buildings require regular inspection to ensure safety and reliability. Conventional visual inspection methods are time-consuming, expensive, and often expose inspectors to hazardous environments. Autonomous monitoring drones (UAVs) provide a faster, safer, and more cost-effective alternative by using advanced sensors, GPS, cameras, and AI-based technologies to collect and analyze structural data. This study proposes an AI-enabled autonomous drone framework for infrastructure inspection that integrates intelligent flight planning, automated data collection, computer vision-based defect detection, and condition assessment. The system accurately identifies cracks, corrosion, and other structural defects while optimizing flight paths for improved efficiency. The proposed framework enhances inspection accuracy, operational safety, and scalability compared to traditional methods, demonstrating significant potential for modern infrastructure management. Future developments may integrate swarm intelligence, edge computing, and digital twins to enable fully autonomous infrastructure monitoring and maintenance.

  • References

    [1] B. F. Spencer Jr., M. E. Ruiz-Sandoval, and N. Kurata, “Smart sensing technology: Opportunities and challenges,” Structural Control and Health Monitoring, vol. 11, no. 4, pp. 349–368, 2004.

    [2] D. M. Frangopol and M. Liu, “Maintenance and management of civil infrastructure based on condition, safety, optimization, and life-cycle cost,” Structure and Infrastructure Engineering, vol. 3, no. 1, pp. 29–41, 2007.

    [3] P. Ellenberg, M. Kontsos, F. Moon, and I. Bartoli, “Bridge inspection using unmanned aerial vehicles,” Journal of Bridge Engineering, vol. 21, no. 1, pp. 1–15, 2016.

    [4] M. R. Jahanshahi, R. Masri, C. Padgett, and G. Sukhatme, “An innovative methodology for detection and quantification of cracks through incorporation of depth perception,” Machine Vision and Applications, vol. 24, no. 2, pp. 227–241, 2013.

    [5] H. Kim, J. Sim, and S. Cho, “Unmanned aerial vehicle-based bridge inspection method using image processing,” Automation in Construction, vol. 85, pp. 281–294, 2018.

    [6] S. Dorafshan, R. J. Thomas, and M. Maguire, “Comparison of deep convolutional neural networks and edge detectors for image-based crack detection in concrete,” Construction and Building Materials, vol. 186, pp. 1031–1045, 2018.

    [7] Y. Cha, W. Choi, and O. Büyüköztürk, “Deep learning-based crack damage detection using convolutional neural networks,” Computer-Aided Civil and Infrastructure Engineering, vol. 32, no. 5, pp. 361–378, 2017.

    [8] A. Krizhevsky, I. Sutskever, and G. E. Hinton, “ImageNet classification with deep convolutional neural networks,” Advances in Neural Information Processing Systems, vol. 25, pp. 1097–1105, 2012.

    [9] K. He, X. Zhang, S. Ren, and J. Sun, “Deep residual learning for image recognition,” in Proc. IEEE Conference on Computer Vision and Pattern Recognition (CVPR), Las Vegas, NV, USA, 2016, pp. 770–778.

    [10] J. Redmon and A. Farhadi, “YOLOv3: An incremental improvement,” arXiv preprint arXiv:1804.02767, 2018.

    [11] C. Koch, K. Georgieva, V. Kasireddy, B. Akinci, and P. Fieguth, “A review on computer vision-based defect detection and condition assessment of concrete and asphalt civil infrastructure,” Advanced Engineering Informatics, vol. 29, no. 2, pp. 196–210, 2015.

    [12] M. Rakha and A. Gorodetsky, “Review of unmanned aerial system applications in structural health monitoring and assessment,” Engineering Structures, vol. 186, pp. 202–216, 2019.

    [13] F. Nex and F. Remondino, “UAV for 3D mapping applications: A review,” Applied Geomatics, vol. 6, no. 1, pp. 1–15, 2014.

    [14] S. Li, X. Zhao, and G. Zhou, “Automatic pixel-level multiple damage detection of concrete structure using fully convolutional network,” Computer-Aided Civil and Infrastructure Engineering, vol. 34, no. 7, pp. 616–634, 2019.

    [15] M. A. Khan, M. J. Khan, and S. U. Rehman, “Artificial intelligence-based structural health monitoring using unmanned aerial vehicles: A review,” Sensors, vol. 23, no. 4, pp. 1–28, 2023.

  • Downloads