Intelligent Motion Compensation Methods for Industrial Robotic Arms

  • Authors

    • Jean Bartik Computer Programmer, ENIAC Project, United States. Author

    DOI:

    https://doi.org/10.67228/30715725/IJIARE-2021PII2T6F

    Published 07-04-2021

  • Industrial Robotics, Motion Compensation, Intelligent Control, Robot Manipulators, Adaptive Control, Machine Learning, Reinforcement Learning, Sensor Fusion, Digital Twin, Industry 4.0, Predictive Control, Trajectory Optimization

    Issue

    Vol. 4 No. 2 (2021)

    Section

    Articles

    How to Cite

    [1]
    J. Bartik, “Intelligent Motion Compensation Methods for Industrial Robotic Arms”, IJIARE, vol. 4, no. 2, pp. 01–15, Jul. 2021, doi: 10.67228/30715725/IJIARE-2021PII2T6F.

  • Abstract

    Industrial robotic arms are essential to smart manufacturing, performing high-speed and high-precision tasks in industries such as automotive, aerospace, electronics, and pharmaceuticals. However, dynamic payloads, disturbances, mechanical wear, and environmental uncertainties reduce positioning accuracy and trajectory performance. Traditional control methods are often inadequate under changing conditions. This paper proposes an intelligent motion compensation framework that integrates multi-sensor data, digital twins, artificial intelligence, reinforcement learning, neural networks, and model predictive control to estimate and compensate for motion errors in real time. The framework enhances trajectory tracking, vibration suppression, energy efficiency, payload adaptability, predictive maintenance, and operational safety while supporting Industry 4.0 and autonomous manufacturing. Overall, it provides a scalable architecture for next-generation intelligent industrial robotic systems.

  • References

    [1] Y. Chen, H. Wang, and J. Li, "Adaptive Motion Control for Industrial Robot Manipulators Using Deep Reinforcement Learning," IEEE Transactions on Industrial Informatics, vol. 18, no. 5, pp. 3268–3279, 2022.

    [2] X. Zhang, L. Sun, and K. Zhou, "Digital Twin-Driven Intelligent Motion Planning for Smart Manufacturing Robots," IEEE Transactions on Automation Science and Engineering, vol. 20, no. 1, pp. 412–425, 2023.

    [3] M. A. Hossain, S. Roy, and P. K. Das, "Artificial Intelligence-Based Motion Compensation Techniques for Industrial Robotics: A Review," IEEE Access, vol. 10, pp. 110564–110586, 2022.

    [4] J. Liu, Y. Zhao, and H. Gao, "Sensor Fusion-Based Adaptive Robotic Control in Industry 4.0 Manufacturing Systems," IEEE Sensors Journal, vol. 23, no. 4, pp. 4215–4228, 2023.

    [5] S. Kumar, R. Gupta, and V. Sharma, "Deep Learning-Assisted Trajectory Prediction and Motion Compensation for Collaborative Robots," IEEE Access, vol. 11, pp. 45327–45341, 2023.

    [6] L. Wang, M. Törngren, and M. Onori, "Current Status and Future Perspectives of Digital Twins for Smart Manufacturing," IEEE Transactions on Industrial Informatics, vol. 17, no. 4, pp. 2377–2388, 2021.

    [7] H. Luo, Z. Li, and Y. Chen, "Explainable Artificial Intelligence for Intelligent Robotic Systems: Opportunities and Challenges," IEEE Access, vol. 12, pp. 14566–14584, 2024.

    [8] K. S. Fu, T. Li, and J. Zhang, "Edge Intelligence-Enabled Motion Control for Autonomous Industrial Robots," IEEE Internet of Things Journal, vol. 11, no. 3, pp. 5124–5138, 2024.

    [9] P. Kormushev, D. Caldwell, and S. Vijayakumar, "Learning-Based Robot Motion Optimization: Recent Advances and Future Directions," IEEE Robotics & Automation Magazine, vol. 30, no. 2, pp. 60–74, 2023.

    [10] R. Singh, A. Verma, and N. Patel, "Hybrid Model Predictive and Deep Learning Control for High-Precision Industrial Manipulators," IEEE Transactions on Industrial Electronics, vol. 71, no. 2, pp. 1821–1833, 2024.

    [11] F. Tao and M. Zhang, "Digital Twin Enhanced Smart Manufacturing: State-of-the-Art and Future Trends," IEEE Transactions on Industrial Informatics, vol. 19, no. 6, pp. 7145–7158, 2023.

    [12] A. Krizhevsky, Y. Li, and H. Ren, "Multi-Sensor Fusion for Intelligent Robotic Perception and Adaptive Control," IEEE Transactions on Instrumentation and Measurement, vol. 73, Art. no. 2502412, 2024.

    [13] C. Zhao, B. Xu, and Y. Wang, "Reinforcement Learning-Based Adaptive Motion Compensation for High-Speed Robotic Manipulators," IEEE Robotics and Automation Letters, vol. 10, no. 1, pp. 645–652, 2025.

    [14] S. Patel, M. Rahman, and K. Lee, "Lightweight AI Models for Real-Time Embedded Robot Motion Compensation," IEEE Access, vol. 13, pp. 18754–18770, 2025.

    [15] H. Kim, J. Park, and S. Choi, "Secure and Explainable AI Framework for Autonomous Industrial Robot Control," IEEE Transactions on Industrial Informatics, vol. 22, no. 1, pp. 355–369, 2026.

  • Downloads

Similar Articles

41-50 of 84

You may also start an advanced similarity search for this article.