Application of Nanomaterials in Modern Mechanical Engineering

  • Authors

    • Dr. Noor Al-Farouq Department of Mechanical Engineering, Khalifa University, UAE Author
    • Dr. Faisal Al-Mutairi Department of Mechanical Engineering, Khalifa University, UAE Author

    Published 2026-01-08

  • Nanomaterials, Mechanical Engineering, Nanocomposites, Tribology, Thermal Engineering, Structural Materials, Advanced Manufacturing, Multiscale Mechanics

    Issue

    Vol. 1 No. 1 (2026)

    Section

    Articles

    How to Cite

    Application of Nanomaterials in Modern Mechanical Engineering. (2026). International Journal of Modern Research in Science & Engineering, 1(1), 53-66. https://worldcometresearchgroup.com/index.php/ijmrse/article/view/59

  • Abstract

    Nanomaterials have emerged as a transformative enabler in modern mechanical engineering, offering substantial improvements in material performance, system efficiency, and functional integration beyond the limits of conventional materials. Owing to their nanoscale structural features, these materials exhibit unique mechanical, thermal, electrical, and tribological properties driven by size effects, surface dominance, and quantum confinement phenomena. This paper presents a comprehensive review of nanomaterials applied in key mechanical engineering domains, including structural mechanics, tribology, thermal systems, manufacturing, and energy conversion. Various classes of nanomaterials—such as carbon-based nanostructures, metallic and ceramic nanoparticles, and nanocomposites—are examined with respect to their functional roles in load-bearing components, wear-resistant coatings, heat-transfer media, and intelligent mechanical systems. A methodological framework combining experimental characterization, multiscale modeling, and performance benchmarking is proposed to evaluate nanomaterial-enhanced systems using indicators such as strength-to-weight ratio, fatigue life, friction coefficient, thermal conductivity, and durability. While significant gains in efficiency, lifespan, and energy performance are demonstrated, challenges related to scalability, manufacturing reliability, and environmental impact remain. The paper concludes by outlining future research directions, including AI-assisted material design, sustainable nanomanufacturing, and standardized validation frameworks.

  • References

    [1] R. H. Baughman, A. A. Zakhidov, and W. A. de Heer, “Carbon nanotubes—The route toward applications,” Science, vol. 297, no. 5582, pp. 787–792, 2002.

    [2] K. S. Novoselov et al., “A roadmap for graphene,” Nature, vol. 490, no. 7419, pp. 192–200, 2012.

    [3] J. Njuguna, K. Pielichowski, and J. Desai, “Nanofiller reinforcement of polymer nanocomposites,” Polym. Adv. Technol., vol. 19, no. 8, pp. 947–959, 2008.

    [4] S. Iijima, “Helical microtubules of graphitic carbon,” Nature, vol. 354, no. 6348, pp. 56–58, 1991.

    [5] P. M. Ajayan, L. S. Schadler, and P. V. Braun, Nanocomposite Science and Technology. Weinheim, Germany: Wiley-VCH, 2003.

    [6] T. Thostenson, Z. Ren, and T. Chou, “Advances in the science and technology of carbon nanotubes and their composites,” Compos. Sci. Technol., vol. 61, no. 13, pp. 1899–1912, 2001.

    [7] S. Zhang, J. Zhang, and J. Wang, “Mechanical properties of ceramic nanocomposites,” J. Eur. Ceram. Soc., vol. 30, no. 3, pp. 705–716, 2010.

    [8] R. Ritchie, “Mechanisms of fatigue-crack propagation in ductile and brittle solids,” Int. J. Fract., vol. 100, no. 1, pp. 55–83, 1999.

    [9] S. Suresh, Fatigue of Materials, 2nd ed. Cambridge, U.K.: Cambridge Univ. Press, 1998.

    [10] J. K. Lancaster, “The influence of substrate hardness on the formation and endurance of molybdenum disulphide films,” Wear, vol. 10, no. 2, pp. 103–117, 1967.

    [11] Z. Tang and S. Li, “A review of recent developments of friction modifiers for liquid lubricants,” Curr. Opin. Solid State Mater. Sci., vol. 18, no. 3, pp. 119–139, 2014.

    [12] A. K. Geim and I. V. Grigorieva, “Van der Waals heterostructures,” Nature, vol. 499, no. 7459, pp. 419–425, 2013.

    [13] S. U. S. Choi and J. A. Eastman, “Enhancing thermal conductivity of fluids with nanoparticles,” in Proc. ASME Int. Mech. Eng. Congr., San Francisco, CA, USA, 1995, pp. 99–105.

    [14] X. Q. Wang and A. S. Mujumdar, “Heat transfer characteristics of nanofluids: A review,” Int. J. Therm. Sci., vol. 46, no. 1, pp. 1–19, 2007.

    [15] Y. Ding et al., “Heat transfer of aqueous suspensions of carbon nanotubes,” Int. J. Heat Mass Transf., vol. 49, no. 1–2, pp. 240–250, 2006.

    [16] SUNKARA, S. K. (2025). CLOUD-BASED DATA COLLECTION AND EDGE COMPUTING OPTIMISATION IN ENERGY HARVESTING EH-WSNs (Vol. 26, Issue 7, pp. 2725–2734).

  • Downloads

    • ga